Skip to content

RC-SEC-EN – User manual

Detailing cecks

RC-SEC-EN – User manual

Introduction
Introduction
Basic working tools
Basic working tools
- Index
- General Data
- Predefined sections
  Predefined sections
- General sections
  General sections
- Rectangular sections of columns
  Rectangular sections of columns
- Rectangular section of wall
  Rectangular section of wall
  - Index
  - Stirrups
- Polygonal sections in Torsion
  Polygonal sections in Torsion
  - Index
  - Results
- SLS deflections in single beam
- Forces
- Import general section from dxf file
- Import forces from text file
- Materials Library
- Code and reinforcement options
- Concrete rheological coefficients
- Concrete Cover
- Text height - Printing options
- Colors in the graphs
Theoretical Background
Theoretical Background
- Design basis
  Design basis
- ULS Bending and Axial Force
  ULS Bending and Axial Force
  - Assumptions
  - Uniaxial bending
    Uniaxial bending
    
    Index
    
    Design of reinforcement
    
    Detailing cecks
  - Biaxial bending and axial force
    Biaxial bending and axial force
    
    Index
    
    Safety check with constant M/N
    
    Safety check with constant N
- ULS Shear
  ULS Shear
  - Uniaxial check (predefined section)
  - Biaxial check
    Biaxial check
    
    Index
    
    Effective stirrups area
  - Shear check of walls
- ULS Torsion
  ULS Torsion
  - Torsion check
- ULS Instability
  ULS Instability
  - Nominal curvature method
  - Model column method
- Ductility checks
  Ductility checks
  - Local ductility for beams and columns
  - Local ductility of walls
- SLS checks
  SLS checks
Examples
Examples
References
Contact us

Detailing cecks¶

Strength check based on bending resistance is not sufficient to state the positive conformity of a cross-section.

It is also necessary to check the conformity to the detailing of reinforcement (§8 EC2; §5 EC8) and the detailing with references to member (§9 EC2; §5 EC8) to which section belongs.

Program performs also these checks using the Eurocodes rules and the options assigned in Code and reinforcement options window.